25 realistic Hazardous Materials practice questions for Kentucky CDL applicants. Required for: Drivers transporting placarded hazardous materials. Official test: 30 questions, 24 correct to pass.
Question 1 of 25 · Placards
When must placards be displayed?
-
A.
Before the vehicle is loaded
-
B.
Once the HazMat is loaded and secured before driving
-
C.
After the trip ends
-
D.
Only at weigh stations
Correct answer: B.
Drivers must placard once HazMat is loaded and verify before moving the vehicle.
Question 2 of 25 · Tank Operations
What does the term "outage" mean in HazMat tank operations?
-
A.
Loss of electrical power
-
B.
Empty space left in a tank to allow for liquid expansion
-
C.
Out-of-service tank
-
D.
A leak in the tank
Correct answer: B.
Outage is the empty space left for liquid expansion due to temperature changes.
Question 3 of 25 · Emergencies
When must drivers inform the carrier and emergency responders during a HazMat emergency?
-
A.
As soon as it's safe to do so
-
B.
When they reach the destination
-
C.
Only after the cargo is unloaded
-
D.
Only if asked
Correct answer: A.
Notify carrier and authorities immediately as soon as you can safely do so.
Question 4 of 25 · HazMat Driving
What is the speed limit when transporting HazMat through a tunnel?
-
A.
Tunnel speed limit minus 10 mph
-
B.
Posted limit
-
C.
No speed limit applies to HazMat
-
D.
Posted speed unless lower limit is posted for HazMat
Correct answer: D.
Follow posted limits; lower limits often apply specifically to HazMat in tunnels.
Question 5 of 25 · Shipping Papers
Where can drivers find emergency contact information for the materials they're hauling?
-
A.
On the placards
-
B.
In the shipping papers
-
C.
On the trailer doors
-
D.
In the glove box
Correct answer: B.
A 24-hour emergency contact number must appear on the shipping papers.
Question 6 of 25 · Loading
What does "blasting agents" refer to?
-
A.
Materials used to detonate explosives
-
B.
A class of explosives sensitive to ignition
-
C.
Cleaning agents
-
D.
Aerosol propellants
Correct answer: A.
Blasting agents are materials designed to be set off using a detonator.
Question 7 of 25 · Loading
Which of the following must NEVER be transported with a HazMat shipment?
-
A.
Routine cargo
-
B.
Other foods
-
C.
Class A or B explosives without segregation tables
-
D.
Pet food
Correct answer: C.
Explosives have strict segregation rules. Always consult the segregation table.
Question 8 of 25 · HazMat Basics
Which is the goal of HazMat regulations?
-
A.
To make HazMat transport safer for everyone
-
B.
To allow easy transport of HazMat
-
C.
To increase shipping costs
-
D.
To require more inspections
Correct answer: A.
HazMat rules contain risk to public safety, property, and the environment.
Question 9 of 25 · Parking
When parking HazMat overnight, you should:
-
A.
Park near homes
-
B.
Choose well-lit, safe areas away from people and buildings
-
C.
Park on the shoulder of any road
-
D.
Park in residential areas
Correct answer: B.
Use safe, well-lit parking areas away from people and buildings.
Question 10 of 25 · Tank Operations
Which of these are dangers of hauling liquids in tanks?
-
A.
Liquid surge
-
B.
Outage requirements
-
C.
Top-heavy load
-
D.
All of the above
Correct answer: D.
Surge, outage, and high center of gravity all make tank vehicles uniquely dangerous.
Question 11 of 25 · Emergencies
When a HazMat package leaks, you should:
-
A.
Move it to a safe area
-
B.
Secure the area and call for help
-
C.
Continue the trip
-
D.
Place it in the trailer's rear
Correct answer: B.
Don't move leaking packages. Secure the area and contact qualified responders.
Question 12 of 25 · HazMat Driving
Drivers transporting Division 1.1, 1.2, or 1.3 explosives may NOT:
-
A.
Take a route that goes through tunnels prohibiting explosives
-
B.
Refuel at any station
-
C.
Travel during business hours
-
D.
Cross any state line
Correct answer: A.
Avoid tunnels and routes prohibiting explosives. Use only approved routes.
Question 13 of 25 · Parking
When can a HazMat shipment be left unattended?
-
A.
Whenever the driver leaves the vehicle
-
B.
Only in safe locations such as a carrier facility
-
C.
Anywhere with a sign
-
D.
Only on private roads
Correct answer: B.
HazMat must be attended unless parked at a carrier facility or other approved location.
Question 14 of 25 · Emergencies
What is the first thing you should do if your HazMat load catches fire?
-
A.
Pull over, away from buildings or vehicles, then call 911
-
B.
Drive to the nearest hospital
-
C.
Continue to destination
-
D.
Try to put it out with snow
Correct answer: A.
Stop in a safe place, away from people and buildings, then notify emergency services.
Question 15 of 25 · Shipping Papers
How can a driver determine the hazard class of a material?
-
A.
Read the shipping paper or check the Hazardous Materials Table
-
B.
Smell the package
-
C.
Open the container
-
D.
Ask other drivers
Correct answer: A.
The hazard class appears on shipping papers; the Hazardous Materials Table is the master reference.
Question 16 of 25 · Emergency Equipment
Are flares allowed when stopped near a HazMat leak?
-
A.
Yes, always use flares
-
B.
No, do not use flares near a HazMat leak — use reflective triangles
-
C.
Only with permission
-
D.
Only at night
Correct answer: B.
Open flames are dangerous near leaks. Use reflective triangles instead.
Question 17 of 25 · Loading
When loading or unloading HazMat:
-
A.
Set the parking brake
-
B.
Be sure the cargo is properly braced
-
C.
Stay close to the vehicle
-
D.
All of the above
Correct answer: D.
Keep the brakes set, secure cargo, and remain on alert during loading and unloading.
Question 18 of 25 · HazMat Driving
What should a driver do before transporting any HazMat shipment?
-
A.
Inspect the placards and shipping papers
-
B.
Inspect the vehicle and cargo
-
C.
Plan the route
-
D.
All of the above
Correct answer: D.
Verify all paperwork, vehicle, cargo, and route before HazMat transport.
Question 19 of 25 · Security
Drivers should report any HazMat shipment that:
-
A.
Appears to be tampered with
-
B.
Has missing or damaged placards
-
C.
Has a strong odor or evidence of leakage
-
D.
All of the above
Correct answer: D.
Always report any sign of tampering, damaged placards, or leak evidence.
Question 20 of 25 · Emergencies
Drivers must report HazMat incidents to:
-
A.
The local newspaper
-
B.
Carrier and law enforcement, then the National Response Center
-
C.
No one — drivers are not responsible
-
D.
The shipper only
Correct answer: B.
Notify your carrier and local responders, then call the National Response Center if reportable.
Question 21 of 25 · HazMat Basics
How many hazard classes are there?
Correct answer: C.
There are nine UN hazard classes used for HazMat transportation.
Question 22 of 25 · Placards
How many sides of a HazMat vehicle must be placarded?
-
A.
One
-
B.
Two
-
C.
Three
-
D.
Four
Correct answer: D.
Placards must be displayed on all four sides of the vehicle.
Question 23 of 25 · Emergency Equipment
Which of the following is a sign of a tire fire?
-
A.
Smoke from the tire
-
B.
A loud noise
-
C.
Vibration in the steering
-
D.
All of the above
Correct answer: D.
Watch for smoke, noise, and vibration as warning signs of a tire fire.
Question 24 of 25 · Shipping Papers
Which is true regarding HazMat shipping papers tabs?
-
A.
They must be tabbed or be the first paper
-
B.
They are filed alphabetically only
-
C.
They are not required to be visible
-
D.
They must be in a sealed envelope
Correct answer: A.
HazMat papers must be the top paper or tabbed to be readily identifiable.
Question 25 of 25 · Emergencies
What does "ERG" stand for?
-
A.
Emergency Response Guide
-
B.
Energy Regulations Guide
-
C.
Environmental Resource Guide
-
D.
Emissions Reduction Guide
Correct answer: A.
The DOT Emergency Response Guidebook contains response info for HazMat incidents.
About the Hazardous Materials Test
The Hazardous Materials (HazMat) test covers the rules for transporting materials that pose a risk to health, safety, and property. Topics include the hazardous materials table, shipping papers, marking, labeling, placarding, loading and unloading, bulk packaging, driving and parking rules, communications, emergencies, and hazardous materials regulations enforced by the U.S. Department of Transportation Pipeline and Hazardous Materials Safety Administration. A federal Transportation Security Administration (TSA) background check is also required.
The Kentucky Division of Driver Licensing administers this knowledge test as part of its commercial driver license program. To earn the HazMat Endorsement (H) on your Kentucky CDL, you need to score at least 24 out of 30 on the official version.
Topics covered on this practice test
- Emergencies: 5 questions
- HazMat Driving: 3 questions
- Shipping Papers: 3 questions
- Loading: 3 questions
- Placards: 2 questions
- Tank Operations: 2 questions
- HazMat Basics: 2 questions
- Parking: 2 questions
- Emergency Equipment: 2 questions
- Security: 1 question
How to use this practice test
- Read each question carefully. CDL questions are written precisely — small wording differences matter.
- Click "Show Answers & Explanations" only after answering every question. Don't peek mid-test.
- Read the explanation for every question, even ones you got right. The reasoning is more important than the answer.
- Repeat the test until you score 100%. The questions are deterministic per state, so you can track your improvement over multiple sessions.
- Move on to the other endorsement tests for Kentucky until you're ready for the official exam.
Tips specific to the Hazardous Materials test
HazMat is the longest knowledge test (30 questions) and adds a Transportation Security Administration (TSA) background check. Most candidates struggle with placard colors, the segregation table, shipping paper requirements, and emergency response procedures. Use the official Emergency Response Guidebook (ERG) alongside this practice set.