25 realistic Tank Vehicles practice questions for Louisiana CDL applicants. Required for: Vehicles with liquid or gaseous tanks ≥1,000 gallons. Official test: 20 questions, 16 correct to pass.
Question 1 of 25 · Rail Crossings
What's the recommended safe practice when crossing railroad tracks with a tanker?
-
A.
Stop within 15-50 feet of nearest rail and look and listen for trains
-
B.
Speed up across the tracks
-
C.
Stop on the tracks
-
D.
Drive across normally
Correct answer: A.
Stop 15 to 50 feet from nearest rail. Don't shift gears while crossing.
Question 2 of 25 · Inspection
How can drivers detect a tank leak?
-
A.
Visual inspection during pre-trip and en-route stops
-
B.
Smell of the cargo
-
C.
Sound of escaping fluid
-
D.
All of the above
Correct answer: D.
Sight, smell, and sound can all help detect leaks. Inspect at every stop.
Question 3 of 25 · Vehicle Dynamics
Why must drivers be especially careful when starting and stopping a tanker?
-
A.
Surge can cause loss of control
-
B.
Engine torque is too high
-
C.
Brakes are weaker
-
D.
Steering is harder
Correct answer: A.
Surge during starts and stops can shove the vehicle and cause loss of control.
Question 4 of 25 · Backing
What should a driver do before backing a tanker?
-
A.
Check the path with a helper
-
B.
Look behind the vehicle
-
C.
Walk around the vehicle to check clearances
-
D.
All of the above
Correct answer: D.
Use a helper, walk-around, and check the path before backing.
Question 5 of 25 · Inspection
Why must drivers check the discharge valve before driving?
-
A.
To verify it is closed and not leaking
-
B.
To allow ventilation
-
C.
To start the engine
-
D.
To engage the brakes
Correct answer: A.
Discharge valves must be closed and leak-free before driving.
Question 6 of 25 · Loading
Why is it important not to overload tank vehicles?
-
A.
Overloading exceeds weight limits
-
B.
It increases risk of tank rupture
-
C.
It changes vehicle handling
-
D.
All of the above
Correct answer: D.
Overloading is illegal and unsafe; it changes handling and stresses the tank.
Question 7 of 25 · Vehicle Dynamics
Why are tank vehicles often top-heavy?
-
A.
The cargo is dense
-
B.
The cargo's liquid weight rises with the tank shape
-
C.
They have raised cargo platforms
-
D.
The center of gravity is high due to liquid load
Correct answer: D.
Tank vehicles tend to have a high center of gravity, making them prone to rollover.
Question 8 of 25 · Tank Types
What's a key difference between compartmented and smooth-bore tanks?
-
A.
Compartmented tanks reduce surge between sections
-
B.
Smooth-bore tanks have less surge
-
C.
They are the same in terms of surge
-
D.
Compartmented tanks are always larger
Correct answer: A.
Compartmented tanks reduce overall surge by limiting movement to each section.
Question 9 of 25 · Tank Types
What is a "smooth bore" tank?
-
A.
A tank with internal baffles
-
B.
A tank without internal baffles or compartments
-
C.
A heated tank
-
D.
A two-compartment tank
Correct answer: B.
Smooth-bore tanks have no internal baffles, so liquid surge is unrestrained.
Question 10 of 25 · Vehicle Dynamics
Why is liquid surge dangerous?
-
A.
It can cause the truck to roll over
-
B.
It can push the truck in the direction the wave moves
-
C.
It can affect handling and braking
-
D.
All of the above
Correct answer: D.
Surge can roll, push, and disrupt braking — drivers must anticipate it.
Question 11 of 25 · Loading
What's the consequence of overloading a tank?
-
A.
Increased wear on tires and brakes
-
B.
Possible tank rupture
-
C.
Illegal weight violations
-
D.
All of the above
Correct answer: D.
Overloading causes wear, legal trouble, and danger of tank failure.
Question 12 of 25 · Speed Management
What is the leading cause of tanker rollover?
-
A.
Driver error such as speed too high for curves
-
B.
Mechanical failure
-
C.
Weather only
-
D.
Tire blowouts
Correct answer: A.
Speed too high for conditions, especially in curves, is the leading rollover cause.
Question 13 of 25 · Emergency Maneuvers
What's the best approach to handling a flat tire on a tanker?
-
A.
Pull over safely and replace the tire or call for help
-
B.
Continue driving
-
C.
Drive faster to make it to the next exit
-
D.
Stop in the middle of the road
Correct answer: A.
Stop safely and address the flat — driving on it can lead to bigger problems.
Question 14 of 25 · Loading
What is "outage" requirement for liquids that expand a lot?
-
A.
Larger outage required
-
B.
Less outage required
-
C.
No outage required
-
D.
Outage doesn't depend on the liquid
Correct answer: A.
Liquids that expand more (e.g., LPG) require greater outage in the tank.
Question 15 of 25 · Vehicle Dynamics
Why is the high center of gravity dangerous?
-
A.
It increases rollover risk
-
B.
It makes the vehicle more aerodynamic
-
C.
It improves traction
-
D.
It reduces braking force
Correct answer: A.
A high CG raises rollover risk, especially in turns or sudden maneuvers.
Question 16 of 25 · Vehicle Dynamics
When is liquid surge greatest?
-
A.
When tanks are full
-
B.
When tanks are partially full
-
C.
When tanks are empty
-
D.
When tanks are heated
Correct answer: B.
Surge is greatest when tanks are partially full and the liquid can move freely.
Question 17 of 25 · Vehicle Dynamics
What are some hazards of driving smooth-bore tankers?
-
A.
Side-to-side and forward-and-back surge
-
B.
High center of gravity
-
C.
Difficult handling on curves
-
D.
All of the above
Correct answer: D.
Smooth-bore tanks are especially prone to surge, rollover, and difficult handling.
Question 18 of 25 · Mountain Driving
How do drivers control speed on downgrades with tankers?
-
A.
Use lower gears and engine braking
-
B.
Use service brakes only
-
C.
Coast with no brakes
-
D.
Use parking brake
Correct answer: A.
Use proper low gears and engine braking; service brakes only intermittently.
Question 19 of 25 · Adverse Conditions
What's the best practice for starting on slippery roads with a tanker?
-
A.
Accelerate slowly to avoid wheel spin
-
B.
Accelerate quickly
-
C.
Use the lowest gear and slip clutch
-
D.
Use parking brake
Correct answer: A.
Smooth, slow acceleration avoids spinning the drive tires.
Question 20 of 25 · Vehicle Dynamics
How do drivers minimize side-to-side surge?
-
A.
Avoid abrupt lane changes and turns
-
B.
Take turns wide and slow
-
C.
Use partial loads
-
D.
Both A and B
Correct answer: D.
Smooth, slow inputs and wide turns help reduce side-to-side surge.
Question 21 of 25 · Placards
Why are tankers required to have specific markings?
-
A.
To identify the cargo and any hazards
-
B.
To make them more visible
-
C.
For tax purposes
-
D.
For insurance only
Correct answer: A.
Markings identify cargo and any hazards for emergency responders and others.
Question 22 of 25 · Tank Types
What is the purpose of internal baffles?
-
A.
To reduce side-to-side surge
-
B.
To reduce forward and back surge
-
C.
To prevent leaks
-
D.
To increase tank size
Correct answer: B.
Baffles reduce front-to-back surge but do not stop side-to-side surge.
Question 23 of 25 · Loading
How can drivers tell if a tank is properly loaded?
-
A.
Check that all compartments are filled within outage limits
-
B.
Check the weight distribution
-
C.
Confirm valves are closed
-
D.
All of the above
Correct answer: D.
Verify outage, weight distribution, and closed valves before moving.
Question 24 of 25 · Vehicle Dynamics
When is it most dangerous to brake suddenly in a tanker?
-
A.
When tank is partially full
-
B.
When tank is fully loaded
-
C.
When tank is empty
-
D.
When tank is heated
Correct answer: A.
Partial loads create the most surge during sudden braking.
Question 25 of 25 · Loading
When loading tanks, what must drivers consider?
-
A.
Outage requirements for the liquid
-
B.
Weight distribution between compartments
-
C.
Surge potential
-
D.
All of the above
Correct answer: D.
Outage, weight distribution, and surge management all matter when loading tanks.
About the Tank Vehicles Test
The Tank Vehicles test covers inspecting tank vehicles, driving tank vehicles, surge and liquid movement, baffled and unbaffled tanks, outage, and safe driving rules unique to large liquid loads. Tank vehicles handle very differently from dry-freight vehicles because liquid surge can shove the vehicle in the direction the wave moves.
The Louisiana Office of Motor Vehicles administers this knowledge test as part of its commercial driver license program. To earn the Tank Endorsement (N) on your Louisiana CDL, you need to score at least 16 out of 20 on the official version.
Topics covered on this practice test
- Vehicle Dynamics: 8 questions
- Loading: 5 questions
- Tank Types: 3 questions
- Inspection: 2 questions
- Rail Crossings: 1 question
- Backing: 1 question
- Speed Management: 1 question
- Emergency Maneuvers: 1 question
- Mountain Driving: 1 question
- Adverse Conditions: 1 question
- Placards: 1 question
How to use this practice test
- Read each question carefully. CDL questions are written precisely — small wording differences matter.
- Click "Show Answers & Explanations" only after answering every question. Don't peek mid-test.
- Read the explanation for every question, even ones you got right. The reasoning is more important than the answer.
- Repeat the test until you score 100%. The questions are deterministic per state, so you can track your improvement over multiple sessions.
- Move on to the other endorsement tests for Louisiana until you're ready for the official exam.
Tips specific to the Tank Vehicles test
Tank vehicle questions focus on liquid surge, outage, smooth-bore versus baffled tanks, high center of gravity, and the special braking and turning techniques required to keep a partially-loaded tank under control. Expect several questions about leak response and load distribution.