25 realistic Tank Vehicles practice questions for Nevada CDL applicants. Required for: Vehicles with liquid or gaseous tanks ≥1,000 gallons. Official test: 20 questions, 16 correct to pass.
Question 1 of 25 · Loading
When loading tanks, what must drivers consider?
-
A.
Outage requirements for the liquid
-
B.
Weight distribution between compartments
-
C.
Surge potential
-
D.
All of the above
Correct answer: D.
Outage, weight distribution, and surge management all matter when loading tanks.
Question 2 of 25 · Vehicle Dynamics
How does liquid weight affect handling?
-
A.
It changes the center of gravity
-
B.
It affects acceleration
-
C.
It affects braking
-
D.
All of the above
Correct answer: D.
Liquid loads alter CG and dramatically affect acceleration and braking.
Question 3 of 25 · Adverse Conditions
What's the best practice for starting on slippery roads with a tanker?
-
A.
Accelerate slowly to avoid wheel spin
-
B.
Accelerate quickly
-
C.
Use the lowest gear and slip clutch
-
D.
Use parking brake
Correct answer: A.
Smooth, slow acceleration avoids spinning the drive tires.
Question 4 of 25 · Adverse Conditions
What's the safe way to handle a tanker on icy roads?
-
A.
Slow down and increase following distance
-
B.
Use chains if required
-
C.
Avoid sudden braking and steering
-
D.
All of the above
Correct answer: D.
Reduced speed, chains where required, and smooth inputs reduce risk on ice.
Question 5 of 25 · Vehicle Dynamics
What are some hazards of driving smooth-bore tankers?
-
A.
Side-to-side and forward-and-back surge
-
B.
High center of gravity
-
C.
Difficult handling on curves
-
D.
All of the above
Correct answer: D.
Smooth-bore tanks are especially prone to surge, rollover, and difficult handling.
Question 6 of 25 · Speed Management
What is the leading cause of tanker rollover?
-
A.
Driver error such as speed too high for curves
-
B.
Mechanical failure
-
C.
Weather only
-
D.
Tire blowouts
Correct answer: A.
Speed too high for conditions, especially in curves, is the leading rollover cause.
Question 7 of 25 · Vehicle Dynamics
Why must drivers be especially careful when starting and stopping a tanker?
-
A.
Surge can cause loss of control
-
B.
Engine torque is too high
-
C.
Brakes are weaker
-
D.
Steering is harder
Correct answer: A.
Surge during starts and stops can shove the vehicle and cause loss of control.
Question 8 of 25 · Loading
What's the consequence of overloading a tank?
-
A.
Increased wear on tires and brakes
-
B.
Possible tank rupture
-
C.
Illegal weight violations
-
D.
All of the above
Correct answer: D.
Overloading causes wear, legal trouble, and danger of tank failure.
Question 9 of 25 · Inspection
Why must drivers check the discharge valve before driving?
-
A.
To verify it is closed and not leaking
-
B.
To allow ventilation
-
C.
To start the engine
-
D.
To engage the brakes
Correct answer: A.
Discharge valves must be closed and leak-free before driving.
Question 10 of 25 · Mountain Driving
How do drivers control speed on downgrades with tankers?
-
A.
Use lower gears and engine braking
-
B.
Use service brakes only
-
C.
Coast with no brakes
-
D.
Use parking brake
Correct answer: A.
Use proper low gears and engine braking; service brakes only intermittently.
Question 11 of 25 · Vehicle Dynamics
What's the most important thing to remember about driving a tanker?
-
A.
Be aware of liquid surge and high center of gravity
-
B.
Drive faster to maintain schedule
-
C.
Skip pre-trip inspections
-
D.
Ignore weather conditions
Correct answer: A.
Surge and CG awareness are the cornerstones of safe tanker driving.
Question 12 of 25 · Loading
What is a vapor recovery system?
-
A.
A way to recover heat
-
B.
A system to recover vapors during loading and unloading to reduce emissions
-
C.
An air brake component
-
D.
A backup pump
Correct answer: B.
Vapor recovery captures vapors during transfer to limit emissions.
Question 13 of 25 · Mountain Driving
What's the proper way to handle a tanker on a steep downgrade?
-
A.
Use lower gears and engine braking with intermittent service brake
-
B.
Coast in neutral
-
C.
Brake hard the whole way
-
D.
Use the parking brake
Correct answer: A.
Lower gears and engine braking; use service brakes intermittently to avoid overheating.
Question 14 of 25 · Tank Types
What is a "smooth bore" tank?
-
A.
A tank with internal baffles
-
B.
A tank without internal baffles or compartments
-
C.
A heated tank
-
D.
A two-compartment tank
Correct answer: B.
Smooth-bore tanks have no internal baffles, so liquid surge is unrestrained.
Question 15 of 25 · Inspection
When checking tanks during pre-trip, what should be inspected?
-
A.
Tank shell for cracks or corrosion
-
B.
Manhole cover and seals
-
C.
Discharge valves
-
D.
All of the above
Correct answer: D.
Inspect the shell, seals, valves, and other tank components every pre-trip.
Question 16 of 25 · Vehicle Dynamics
What can drivers do to control surge?
-
A.
Brake gradually well before stopping
-
B.
Accelerate gradually
-
C.
Allow extra following distance
-
D.
All of the above
Correct answer: D.
Smooth braking and acceleration, plus extra space, all help control surge.
Question 17 of 25 · Vehicle Dynamics
When is liquid surge greatest?
-
A.
When tanks are full
-
B.
When tanks are partially full
-
C.
When tanks are empty
-
D.
When tanks are heated
Correct answer: B.
Surge is greatest when tanks are partially full and the liquid can move freely.
Question 18 of 25 · Loading
What is "outage" in tank operations?
-
A.
Lost electricity
-
B.
Empty space allowed in a tank for liquid to expand
-
C.
Tank failure
-
D.
Loss of brake pressure
Correct answer: B.
Liquids expand with heat. Outage is the empty space left for that expansion.
Question 19 of 25 · Emergency Maneuvers
What's the best approach to handling a flat tire on a tanker?
-
A.
Pull over safely and replace the tire or call for help
-
B.
Continue driving
-
C.
Drive faster to make it to the next exit
-
D.
Stop in the middle of the road
Correct answer: A.
Stop safely and address the flat — driving on it can lead to bigger problems.
Question 20 of 25 · Tank Types
What is "compartmented tanks"?
-
A.
Tanks split into multiple sections
-
B.
Tanks made for grain
-
C.
Tanks made for hazardous materials only
-
D.
Tanks with one large interior
Correct answer: A.
Compartmented tanks have multiple sections so different liquids can be carried separately.
Question 21 of 25 · Loading
Why must tanker drivers be careful when refueling?
-
A.
Risk of fire from spills
-
B.
Risk of cargo contamination
-
C.
Risk of overloading
-
D.
Both A and B
Correct answer: D.
Spills can ignite and cargo can be contaminated by fuel.
Question 22 of 25 · Vehicle Dynamics
What's a key safety feature in modern tankers?
-
A.
Automatic emergency braking
-
B.
Stability control systems
-
C.
Reinforced tank shells
-
D.
All of the above
Correct answer: D.
Modern tankers often combine ABS, stability control, and reinforced shells for safety.
Question 23 of 25 · Operation
What's the recommended safe braking technique for tank trucks?
-
A.
Apply brakes gradually well before stopping
-
B.
Quick, hard braking
-
C.
Use the engine retarder primarily
-
D.
Brake at the last second
Correct answer: A.
Brake gradually and well in advance — sudden braking magnifies surge.
Question 24 of 25 · Vehicle Dynamics
What can cause a tanker to roll over?
-
A.
Sharp turns
-
B.
Sudden steering corrections
-
C.
Speed too high for road conditions
-
D.
All of the above
Correct answer: D.
All of these can cause rollovers; smooth, slow inputs reduce risk.
Question 25 of 25 · Vehicle Dynamics
How can drivers prevent tanker rollover?
-
A.
Reduce speed in curves and ramps
-
B.
Avoid sudden steering
-
C.
Maintain proper load and securement
-
D.
All of the above
Correct answer: D.
Slow speed, smooth steering, and proper loading all help prevent rollovers.
About the Tank Vehicles Test
The Tank Vehicles test covers inspecting tank vehicles, driving tank vehicles, surge and liquid movement, baffled and unbaffled tanks, outage, and safe driving rules unique to large liquid loads. Tank vehicles handle very differently from dry-freight vehicles because liquid surge can shove the vehicle in the direction the wave moves.
The Nevada Department of Motor Vehicles administers this knowledge test as part of its commercial driver license program. To earn the Tank Endorsement (N) on your Nevada CDL, you need to score at least 16 out of 20 on the official version.
Topics covered on this practice test
- Vehicle Dynamics: 9 questions
- Loading: 5 questions
- Adverse Conditions: 2 questions
- Inspection: 2 questions
- Mountain Driving: 2 questions
- Tank Types: 2 questions
- Speed Management: 1 question
- Emergency Maneuvers: 1 question
- Operation: 1 question
How to use this practice test
- Read each question carefully. CDL questions are written precisely — small wording differences matter.
- Click "Show Answers & Explanations" only after answering every question. Don't peek mid-test.
- Read the explanation for every question, even ones you got right. The reasoning is more important than the answer.
- Repeat the test until you score 100%. The questions are deterministic per state, so you can track your improvement over multiple sessions.
- Move on to the other endorsement tests for Nevada until you're ready for the official exam.
Tips specific to the Tank Vehicles test
Tank vehicle questions focus on liquid surge, outage, smooth-bore versus baffled tanks, high center of gravity, and the special braking and turning techniques required to keep a partially-loaded tank under control. Expect several questions about leak response and load distribution.