25 realistic Hazardous Materials practice questions for North Dakota CDL applicants. Required for: Drivers transporting placarded hazardous materials. Official test: 30 questions, 24 correct to pass.
Question 1 of 25 · Shipping Papers
Where can drivers find emergency contact information for the materials they're hauling?
-
A.
On the placards
-
B.
In the shipping papers
-
C.
On the trailer doors
-
D.
In the glove box
Correct answer: B.
A 24-hour emergency contact number must appear on the shipping papers.
Question 2 of 25 · Tank Operations
What does the term "outage" mean in HazMat tank operations?
-
A.
Loss of electrical power
-
B.
Empty space left in a tank to allow for liquid expansion
-
C.
Out-of-service tank
-
D.
A leak in the tank
Correct answer: B.
Outage is the empty space left for liquid expansion due to temperature changes.
Question 3 of 25 · Placards
Which of these is required if a vehicle's placards are missing or destroyed?
-
A.
Placards must be replaced before continuing
-
B.
Drivers can continue without placards
-
C.
Drivers must call OSHA
-
D.
Drivers must wait until next shipping point
Correct answer: A.
Replace missing or damaged placards immediately before continuing.
Question 4 of 25 · Shipping Papers
Where do you find a list of names of hazardous wastes?
-
A.
EPA Hazardous Waste Manifest
-
B.
Driver manual
-
C.
Local newspaper
-
D.
CDL handbook
Correct answer: A.
Hazardous waste appears on the EPA hazardous waste manifest, signed by both shipper and driver.
Question 5 of 25 · HazMat Driving
What should a driver do before transporting any HazMat shipment?
-
A.
Inspect the placards and shipping papers
-
B.
Inspect the vehicle and cargo
-
C.
Plan the route
-
D.
All of the above
Correct answer: D.
Verify all paperwork, vehicle, cargo, and route before HazMat transport.
Question 6 of 25 · HazMat Basics
Which is the goal of HazMat regulations?
-
A.
To make HazMat transport safer for everyone
-
B.
To allow easy transport of HazMat
-
C.
To increase shipping costs
-
D.
To require more inspections
Correct answer: A.
HazMat rules contain risk to public safety, property, and the environment.
Question 7 of 25 · Shipping Papers
What information must a HazMat driver have on the bills of lading?
-
A.
Total quantity by weight or volume
-
B.
Number and type of packages
-
C.
Shipping name and hazard class
-
D.
All of the above
Correct answer: D.
All of these must be included for HazMat shipments.
Question 8 of 25 · HazMat Basics
Which HazMat is most dangerous if released into the environment?
-
A.
Class 7 radioactive
-
B.
Class 4 flammable solid
-
C.
All HazMat are dangerous and require precaution
-
D.
Class 9 miscellaneous
Correct answer: C.
Treat every HazMat shipment as dangerous and follow all rules.
Question 9 of 25 · Security
Which of these is part of the carrier's security plan?
-
A.
Personnel security
-
B.
Unauthorized access prevention
-
C.
En-route security
-
D.
All of the above
Correct answer: D.
Carrier security plans cover personnel checks, access controls, and en-route security.
Question 10 of 25 · Shipping Papers
Which is true regarding HazMat shipping papers tabs?
-
A.
They must be tabbed or be the first paper
-
B.
They are filed alphabetically only
-
C.
They are not required to be visible
-
D.
They must be in a sealed envelope
Correct answer: A.
HazMat papers must be the top paper or tabbed to be readily identifiable.
Question 11 of 25 · Shipping Papers
HazMat shipping papers must be:
-
A.
Out of the driver's reach
-
B.
Within the driver's reach while driving and clearly distinguished from other shipping papers
-
C.
In the trailer with the cargo
-
D.
Mailed to the receiver in advance
Correct answer: B.
Shipping papers must be within reach and identifiable. They must be on the seat or in a door pouch.
Question 12 of 25 · HazMat Driving
When can drivers smoke around a HazMat vehicle?
-
A.
While driving only
-
B.
When parked at a truck stop
-
C.
Never within 25 feet of certain materials
-
D.
Whenever convenient
Correct answer: C.
Smoking is forbidden within 25 feet of HazMat including explosives, oxidizers, or flammables.
Question 13 of 25 · Shipping Papers
Where can a driver find information about which HazMat are flammable?
-
A.
Hazardous Materials Table
-
B.
CDL test only
-
C.
Engine manual
-
D.
Driver license documents
Correct answer: A.
The DOT Hazardous Materials Table classifies materials and lists handling requirements.
Question 14 of 25 · Placards
What does each placard show?
-
A.
The hazard class number
-
B.
A pictorial symbol for the hazard
-
C.
The four-digit ID number when required
-
D.
All of the above
Correct answer: D.
Placards show the hazard class number, symbol, and ID number when required.
Question 15 of 25 · Loading
You should turn off your engine when:
-
A.
Loading or unloading flammable liquids
-
B.
Driving on a hill
-
C.
Inspecting brakes
-
D.
Refueling on the highway
Correct answer: A.
Turn off the engine when loading or unloading flammable liquids to reduce ignition risk.
Question 16 of 25 · Loading
When loading or unloading HazMat:
-
A.
Set the parking brake
-
B.
Be sure the cargo is properly braced
-
C.
Stay close to the vehicle
-
D.
All of the above
Correct answer: D.
Keep the brakes set, secure cargo, and remain on alert during loading and unloading.
Question 17 of 25 · Loading
What does "blasting agents" refer to?
-
A.
Materials used to detonate explosives
-
B.
A class of explosives sensitive to ignition
-
C.
Cleaning agents
-
D.
Aerosol propellants
Correct answer: A.
Blasting agents are materials designed to be set off using a detonator.
Question 18 of 25 · Shipping Papers
How can a driver determine the hazard class of a material?
-
A.
Read the shipping paper or check the Hazardous Materials Table
-
B.
Smell the package
-
C.
Open the container
-
D.
Ask other drivers
Correct answer: A.
The hazard class appears on shipping papers; the Hazardous Materials Table is the master reference.
Question 19 of 25 · Placards
When must placards be displayed?
-
A.
Before the vehicle is loaded
-
B.
Once the HazMat is loaded and secured before driving
-
C.
After the trip ends
-
D.
Only at weigh stations
Correct answer: B.
Drivers must placard once HazMat is loaded and verify before moving the vehicle.
Question 20 of 25 · Placards
Green placards usually indicate:
-
A.
Compressed gases (non-flammable)
-
B.
Explosives
-
C.
Poisons
-
D.
Corrosives
Correct answer: A.
Green placards usually indicate non-flammable compressed gases.
Question 21 of 25 · Emergency Equipment
Which of the following is a sign of a tire fire?
-
A.
Smoke from the tire
-
B.
A loud noise
-
C.
Vibration in the steering
-
D.
All of the above
Correct answer: D.
Watch for smoke, noise, and vibration as warning signs of a tire fire.
Question 22 of 25 · Emergency Equipment
Are flares allowed when stopped near a HazMat leak?
-
A.
Yes, always use flares
-
B.
No, do not use flares near a HazMat leak — use reflective triangles
-
C.
Only with permission
-
D.
Only at night
Correct answer: B.
Open flames are dangerous near leaks. Use reflective triangles instead.
Question 23 of 25 · Emergencies
When a HazMat package leaks, you should:
-
A.
Move it to a safe area
-
B.
Secure the area and call for help
-
C.
Continue the trip
-
D.
Place it in the trailer's rear
Correct answer: B.
Don't move leaking packages. Secure the area and contact qualified responders.
Question 24 of 25 · Placards
How are placards different from labels?
-
A.
Labels go on packages; placards go on vehicles
-
B.
Placards go on packages and labels go on vehicles
-
C.
They are the same
-
D.
Labels are only required outside the U.S.
Correct answer: A.
Labels mark individual packages; placards identify HazMat on vehicles.
Question 25 of 25 · Shipping Papers
Drivers must check shipping papers for:
-
A.
Proper shipping name, hazard class, identification number
-
B.
Total quantity
-
C.
Emergency response number
-
D.
All of the above
Correct answer: D.
Each entry must include the shipping name, class, ID number, quantity, and emergency contact.
About the Hazardous Materials Test
The Hazardous Materials (HazMat) test covers the rules for transporting materials that pose a risk to health, safety, and property. Topics include the hazardous materials table, shipping papers, marking, labeling, placarding, loading and unloading, bulk packaging, driving and parking rules, communications, emergencies, and hazardous materials regulations enforced by the U.S. Department of Transportation Pipeline and Hazardous Materials Safety Administration. A federal Transportation Security Administration (TSA) background check is also required.
The North Dakota Department of Transportation — Drivers License administers this knowledge test as part of its commercial driver license program. To earn the HazMat Endorsement (H) on your North Dakota CDL, you need to score at least 24 out of 30 on the official version.
Topics covered on this practice test
- Shipping Papers: 8 questions
- Placards: 5 questions
- Loading: 3 questions
- HazMat Driving: 2 questions
- HazMat Basics: 2 questions
- Emergency Equipment: 2 questions
- Tank Operations: 1 question
- Security: 1 question
- Emergencies: 1 question
How to use this practice test
- Read each question carefully. CDL questions are written precisely — small wording differences matter.
- Click "Show Answers & Explanations" only after answering every question. Don't peek mid-test.
- Read the explanation for every question, even ones you got right. The reasoning is more important than the answer.
- Repeat the test until you score 100%. The questions are deterministic per state, so you can track your improvement over multiple sessions.
- Move on to the other endorsement tests for North Dakota until you're ready for the official exam.
Tips specific to the Hazardous Materials test
HazMat is the longest knowledge test (30 questions) and adds a Transportation Security Administration (TSA) background check. Most candidates struggle with placard colors, the segregation table, shipping paper requirements, and emergency response procedures. Use the official Emergency Response Guidebook (ERG) alongside this practice set.