25 realistic Tank Vehicles practice questions for Oklahoma CDL applicants. Required for: Vehicles with liquid or gaseous tanks ≥1,000 gallons. Official test: 20 questions, 16 correct to pass.
Question 1 of 25 · Operation
What's the recommended safe braking technique for tank trucks?
-
A.
Apply brakes gradually well before stopping
-
B.
Quick, hard braking
-
C.
Use the engine retarder primarily
-
D.
Brake at the last second
Correct answer: A.
Brake gradually and well in advance — sudden braking magnifies surge.
Question 2 of 25 · Mountain Driving
What's the proper way to handle a tanker on a steep downgrade?
-
A.
Use lower gears and engine braking with intermittent service brake
-
B.
Coast in neutral
-
C.
Brake hard the whole way
-
D.
Use the parking brake
Correct answer: A.
Lower gears and engine braking; use service brakes intermittently to avoid overheating.
Question 3 of 25 · Placards
Why are tankers required to have specific markings?
-
A.
To identify the cargo and any hazards
-
B.
To make them more visible
-
C.
For tax purposes
-
D.
For insurance only
Correct answer: A.
Markings identify cargo and any hazards for emergency responders and others.
Question 4 of 25 · Backing
What should a driver do before backing a tanker?
-
A.
Check the path with a helper
-
B.
Look behind the vehicle
-
C.
Walk around the vehicle to check clearances
-
D.
All of the above
Correct answer: D.
Use a helper, walk-around, and check the path before backing.
Question 5 of 25 · Vehicle Dynamics
How does liquid weight affect handling?
-
A.
It changes the center of gravity
-
B.
It affects acceleration
-
C.
It affects braking
-
D.
All of the above
Correct answer: D.
Liquid loads alter CG and dramatically affect acceleration and braking.
Question 6 of 25 · Vehicle Dynamics
How can drivers prevent tanker rollover?
-
A.
Reduce speed in curves and ramps
-
B.
Avoid sudden steering
-
C.
Maintain proper load and securement
-
D.
All of the above
Correct answer: D.
Slow speed, smooth steering, and proper loading all help prevent rollovers.
Question 7 of 25 · CDL Rules
How are tanker drivers trained for hazardous cargo?
-
A.
Same as regular drivers
-
B.
They receive specialized training and may need HazMat endorsement
-
C.
No specific training required
-
D.
They are trained by the shipper
Correct answer: B.
Hazardous tankers require additional training and often a HazMat endorsement.
Question 8 of 25 · Speed Management
What should you do when going around curves with a tanker?
-
A.
Slow down well below the posted speed
-
B.
Drive at the posted speed limit
-
C.
Use the engine retarder
-
D.
Lock the brakes
Correct answer: A.
Take curves at speeds well below the posted limit to avoid rollovers.
Question 9 of 25 · Tank Types
What is "compartmented tanks"?
-
A.
Tanks split into multiple sections
-
B.
Tanks made for grain
-
C.
Tanks made for hazardous materials only
-
D.
Tanks with one large interior
Correct answer: A.
Compartmented tanks have multiple sections so different liquids can be carried separately.
Question 10 of 25 · Loading
Why is it important not to overload tank vehicles?
-
A.
Overloading exceeds weight limits
-
B.
It increases risk of tank rupture
-
C.
It changes vehicle handling
-
D.
All of the above
Correct answer: D.
Overloading is illegal and unsafe; it changes handling and stresses the tank.
Question 11 of 25 · Vehicle Dynamics
Why is the high center of gravity dangerous?
-
A.
It increases rollover risk
-
B.
It makes the vehicle more aerodynamic
-
C.
It improves traction
-
D.
It reduces braking force
Correct answer: A.
A high CG raises rollover risk, especially in turns or sudden maneuvers.
Question 12 of 25 · Loading
When loading tanks, what must drivers consider?
-
A.
Outage requirements for the liquid
-
B.
Weight distribution between compartments
-
C.
Surge potential
-
D.
All of the above
Correct answer: D.
Outage, weight distribution, and surge management all matter when loading tanks.
Question 13 of 25 · Loading
What is "outage" in tank operations?
-
A.
Lost electricity
-
B.
Empty space allowed in a tank for liquid to expand
-
C.
Tank failure
-
D.
Loss of brake pressure
Correct answer: B.
Liquids expand with heat. Outage is the empty space left for that expansion.
Question 14 of 25 · Speed Management
When should tank drivers especially reduce speed?
-
A.
On wet or slippery roads
-
B.
On curves
-
C.
On ramps
-
D.
All of the above
Correct answer: D.
Slow down on wet roads, curves, and ramps — all increase rollover risk.
Question 15 of 25 · Inspection
How can drivers detect a tank leak?
-
A.
Visual inspection during pre-trip and en-route stops
-
B.
Smell of the cargo
-
C.
Sound of escaping fluid
-
D.
All of the above
Correct answer: D.
Sight, smell, and sound can all help detect leaks. Inspect at every stop.
Question 16 of 25 · Loading
What is a vapor recovery system?
-
A.
A way to recover heat
-
B.
A system to recover vapors during loading and unloading to reduce emissions
-
C.
An air brake component
-
D.
A backup pump
Correct answer: B.
Vapor recovery captures vapors during transfer to limit emissions.
Question 17 of 25 · Vehicle Dynamics
How do drivers minimize side-to-side surge?
-
A.
Avoid abrupt lane changes and turns
-
B.
Take turns wide and slow
-
C.
Use partial loads
-
D.
Both A and B
Correct answer: D.
Smooth, slow inputs and wide turns help reduce side-to-side surge.
Question 18 of 25 · Tank Types
What is a "smooth bore" tank?
-
A.
A tank with internal baffles
-
B.
A tank without internal baffles or compartments
-
C.
A heated tank
-
D.
A two-compartment tank
Correct answer: B.
Smooth-bore tanks have no internal baffles, so liquid surge is unrestrained.
Question 19 of 25 · Vehicle Dynamics
Why is liquid surge dangerous?
-
A.
It can cause the truck to roll over
-
B.
It can push the truck in the direction the wave moves
-
C.
It can affect handling and braking
-
D.
All of the above
Correct answer: D.
Surge can roll, push, and disrupt braking — drivers must anticipate it.
Question 20 of 25 · Placards
What's the role of the tanker placard?
-
A.
To identify cargo for emergency responders
-
B.
To indicate the vehicle is heavy
-
C.
To indicate the vehicle is restricted
-
D.
To warn of slow speed
Correct answer: A.
Placards identify cargo, alerting first responders to the type of hazard.
Question 21 of 25 · Parking
What's the safest place to park a tank vehicle overnight?
-
A.
Designated truck parking areas away from buildings
-
B.
On the highway shoulder
-
C.
In residential areas
-
D.
Anywhere with lighting
Correct answer: A.
Use designated truck parking areas away from people and buildings.
Question 22 of 25 · HazMat Driving
Why is "no smoking" enforced near tankers?
-
A.
Risk of fire and explosion from cargo vapors
-
B.
Cleanliness
-
C.
Tradition
-
D.
OSHA rules only
Correct answer: A.
Vapors can ignite or explode; smoking is prohibited near tankers.
Question 23 of 25 · Inspection
What's the importance of regular maintenance for tank vehicles?
-
A.
Prevents leaks
-
B.
Ensures safe operation
-
C.
Identifies problems before failures
-
D.
All of the above
Correct answer: D.
Routine maintenance prevents leaks, failures, and unsafe operation.
Question 24 of 25 · Tank Types
What is the purpose of internal baffles?
-
A.
To reduce side-to-side surge
-
B.
To reduce forward and back surge
-
C.
To prevent leaks
-
D.
To increase tank size
Correct answer: B.
Baffles reduce front-to-back surge but do not stop side-to-side surge.
Question 25 of 25 · Loading
What is "outage" requirement for liquids that expand a lot?
-
A.
Larger outage required
-
B.
Less outage required
-
C.
No outage required
-
D.
Outage doesn't depend on the liquid
Correct answer: A.
Liquids that expand more (e.g., LPG) require greater outage in the tank.
About the Tank Vehicles Test
The Tank Vehicles test covers inspecting tank vehicles, driving tank vehicles, surge and liquid movement, baffled and unbaffled tanks, outage, and safe driving rules unique to large liquid loads. Tank vehicles handle very differently from dry-freight vehicles because liquid surge can shove the vehicle in the direction the wave moves.
The Oklahoma Department of Public Safety — Driver License Services administers this knowledge test as part of its commercial driver license program. To earn the Tank Endorsement (N) on your Oklahoma CDL, you need to score at least 16 out of 20 on the official version.
Topics covered on this practice test
- Vehicle Dynamics: 5 questions
- Loading: 5 questions
- Tank Types: 3 questions
- Placards: 2 questions
- Speed Management: 2 questions
- Inspection: 2 questions
- Operation: 1 question
- Mountain Driving: 1 question
- Backing: 1 question
- CDL Rules: 1 question
- Parking: 1 question
- HazMat Driving: 1 question
How to use this practice test
- Read each question carefully. CDL questions are written precisely — small wording differences matter.
- Click "Show Answers & Explanations" only after answering every question. Don't peek mid-test.
- Read the explanation for every question, even ones you got right. The reasoning is more important than the answer.
- Repeat the test until you score 100%. The questions are deterministic per state, so you can track your improvement over multiple sessions.
- Move on to the other endorsement tests for Oklahoma until you're ready for the official exam.
Tips specific to the Tank Vehicles test
Tank vehicle questions focus on liquid surge, outage, smooth-bore versus baffled tanks, high center of gravity, and the special braking and turning techniques required to keep a partially-loaded tank under control. Expect several questions about leak response and load distribution.