25 realistic Air Brakes practice questions for Wyoming CDL applicants. Required for: Vehicles equipped with air brake systems. Official test: 25 questions, 20 correct to pass.
Question 1 of 25 · System Basics
Air brakes use compressed air to:
-
A.
Lubricate the wheels
-
B.
Make the brakes work
-
C.
Cool the engine
-
D.
Increase fuel pressure
Correct answer: B.
Compressed air is the working fluid that applies the brakes in an air brake system.
Question 2 of 25 · Inspection
When should you push the brake pedal during the air brake test?
-
A.
Only when the engine is running
-
B.
When checking the compressor
-
C.
When the engine is off, to check that pressure does not drop too quickly
-
D.
During the brake light test only
Correct answer: C.
Apply firm pressure with the engine off to check for excessive air leakage from the system.
Question 3 of 25 · System Basics
Which of the following is NOT in the air brake system?
-
A.
Brake chambers
-
B.
Slack adjusters
-
C.
S-cam
-
D.
Hydraulic master cylinder
Correct answer: D.
Hydraulic master cylinders are part of hydraulic systems, not air brake systems.
Question 4 of 25 · Speed Management
Which of these statements is true about brake fading?
-
A.
Resting brakes does not bring back braking power
-
B.
Brake fade is caused by drums getting too hot
-
C.
Brake fade only affects new vehicles
-
D.
Brake fade only happens with disc brakes
Correct answer: B.
Brake fade results from overheated drums or discs reducing friction and braking ability.
Question 5 of 25 · Combination Air
When should the trailer brake hand valve be used?
-
A.
To park the trailer
-
B.
To test the trailer brakes only
-
C.
To stop the entire combination
-
D.
Never to keep the vehicle from rolling
Correct answer: B.
Use it only to test trailer brakes. Never use it to park or as a service brake during normal stops.
Question 6 of 25 · Inspection
How much air pressure (psi) loss is allowed per minute for single vehicles with the engine off and brakes released?
-
A.
Up to 1 psi
-
B.
Up to 2 psi
-
C.
Up to 3 psi
-
D.
Up to 4 psi
Correct answer: B.
Single vehicles allow up to 2 psi per minute with brakes released; up to 3 psi with brakes applied.
Question 7 of 25 · Inspection
How much air pressure (psi) loss is allowed per minute for combination vehicles with the engine off and brakes released?
-
A.
Up to 1 psi
-
B.
Up to 2 psi
-
C.
Up to 3 psi
-
D.
Up to 4 psi
Correct answer: B.
Combination vehicles allow up to 3 psi loss per minute with brakes released; with brakes applied, up to 4 psi.
Question 8 of 25 · Gauges
What gauge tells you the air pressure being delivered to the brakes?
-
A.
Application pressure gauge
-
B.
Supply pressure gauge
-
C.
Speedometer
-
D.
Tachometer
Correct answer: A.
The application gauge shows pressure being applied to the brakes when the pedal is pressed.
Question 9 of 25 · Spring Brakes
If your vehicle has dual parking control valves, you can use pressure from a separate tank to:
-
A.
Charge the trailer brakes
-
B.
Release the spring brakes to move a short distance if the main system loses air
-
C.
Operate the steering
-
D.
Power the air horn
Correct answer: B.
Dual parking control valves let you temporarily release spring brakes from a backup tank.
Question 10 of 25 · Parking
You should never use the trailer hand valve to park because:
-
A.
It is not strong enough
-
B.
The air could leak out, releasing the brakes
-
C.
It only applies the front brakes
-
D.
It is not connected to the trailer
Correct answer: B.
If air leaks out, the brakes release. Always use the parking brake to park.
Question 11 of 25 · Compressor
What is the purpose of an alcohol evaporator?
-
A.
Reduce alcohol in the driver's system
-
B.
Reduce risk of frozen brake valves and lines in cold weather
-
C.
Improve fuel economy
-
D.
Lubricate the air compressor
Correct answer: B.
Alcohol injected into the air system reduces freeze-up risk in cold conditions.
Question 12 of 25 · Combination Air
What component prevents air pressure loss in case of a leak between the tractor and trailer?
-
A.
Tractor protection valve
-
B.
Air dryer
-
C.
Foot brake valve
-
D.
Modulating valve
Correct answer: A.
The tractor protection valve closes off the trailer air supply during a leak, protecting tractor air.
Question 13 of 25 · Inspection
When checking air brake adjustment, the engine should be:
-
A.
Running at idle
-
B.
Off with the brakes released
-
C.
Running at high RPM
-
D.
Off with the brakes applied
Correct answer: B.
Inspect with the engine off and the brakes released so chambers are not pressurized.
Question 14 of 25 · Speed Management
Total stopping distance for an air-braked vehicle is made up of:
-
A.
Perception distance + reaction distance + brake lag distance + braking distance
-
B.
Just the braking distance
-
C.
Reaction distance only
-
D.
Brake lag distance only
Correct answer: A.
It is the sum of perception distance, reaction distance, brake lag distance, and braking distance.
Question 15 of 25 · Emergency Maneuvers
Stab braking includes which of these steps?
-
A.
Apply brakes fully, release when wheels lock, reapply when wheels begin rolling
-
B.
Apply brakes lightly until they fade
-
C.
Pump the brakes rapidly
-
D.
Apply the parking brake repeatedly
Correct answer: A.
Stab braking: full application, release on lockup, reapply when wheels turn again.
Question 16 of 25 · Spring Brakes
What happens if the air pressure drops to between 20 and 45 psi?
-
A.
Nothing happens
-
B.
The compressor cuts in
-
C.
Spring brakes apply automatically
-
D.
The trailer is released
Correct answer: C.
Spring brakes typically apply automatically in this range, stopping the vehicle.
Question 17 of 25 · Spring Brakes
What does a "spring brake" mean?
-
A.
A brake that operates only in spring weather
-
B.
A mechanical brake that uses powerful springs to apply the brake when air pressure is lost
-
C.
A specific kind of disc brake
-
D.
A backup hydraulic brake
Correct answer: B.
Spring brakes use powerful coil springs to apply the brakes when air pressure is lost.
Question 18 of 25 · Foundation Brakes
What's the most common type of foundation brake found on heavy vehicles?
-
A.
Disc brakes
-
B.
Wedge drum brakes
-
C.
S-cam drum brakes
-
D.
Air-over-hydraulic
Correct answer: C.
S-cam drum brakes are the most common foundation brakes on heavy commercial vehicles.
Question 19 of 25 · Compressor
The air compressor governor controls:
-
A.
When the air compressor will pump air into the storage tanks
-
B.
When the brakes are applied
-
C.
When emergency brakes engage
-
D.
How fast the air compressor turns
Correct answer: A.
The governor cuts the compressor in and out to keep the system within its operating pressure range.
Question 20 of 25 · Compressor
If the air compressor governor is not working properly:
-
A.
Air compressor may not maintain enough pressure to safely operate the brakes
-
B.
The brakes will work harder
-
C.
Brakes may not release at all
-
D.
There is no impact on safety
Correct answer: A.
A faulty governor can cause low system pressure or over-pressurization, both unsafe.
Question 21 of 25 · Gauges
You should know your vehicle is properly equipped with which gauge?
-
A.
Two air pressure gauges (or one with two needles) showing pressure in primary and secondary tanks
-
B.
A vacuum gauge
-
C.
A voltage meter only
-
D.
A coolant gauge only
Correct answer: A.
Dual air systems require gauges for both primary and secondary air supplies.
Question 22 of 25 · Tanks
Why must air tanks be drained?
-
A.
To remove fuel from the system
-
B.
To remove water and compressor oil that can damage the brakes
-
C.
To inspect the tanks
-
D.
To increase pressure
Correct answer: B.
Water and oil collect in tanks. They damage seals and can freeze in cold weather.
Question 23 of 25 · Inspection
When should you check the parking brake?
-
A.
Whenever you start a trip
-
B.
Once a month
-
C.
Only at inspections
-
D.
When the brake warning light is on
Correct answer: A.
Test the parking brake every trip — apply the brake and try to move forward gently.
Question 24 of 25 · Combination Air
When a tractor protection valve closes, it:
-
A.
Opens the air supply to the trailer
-
B.
Stops air from going to the trailer brakes
-
C.
Causes the parking brake to release
-
D.
Has no effect on the trailer
Correct answer: B.
When closed, it stops airflow to the trailer and applies trailer emergency brakes.
Question 25 of 25 · Speed Management
Air brake lag distance at 55 mph on dry pavement adds about:
-
A.
12 feet to stopping distance
-
B.
32 feet to stopping distance
-
C.
50 feet to stopping distance
-
D.
100 feet to stopping distance
Correct answer: B.
Air brake systems have a lag of about 0.4 seconds, adding roughly 32 feet at 55 mph.
About the Air Brakes Test
The Air Brakes test covers air brake system parts (compressor, governor, reservoirs, drain valves, alcohol evaporator, safety valve, brake pedal, foundation brakes), dual air brake systems, inspecting air brakes, using air brakes (normal stops, emergency stops, parking brakes), and proper procedures for braking on downgrades. If you fail or skip the Air Brakes test, your CDL is restricted to vehicles without full air brake systems.
The Wyoming Driver Services administers this knowledge test as part of its commercial driver license program. To earn the Air Brakes Endorsement on your Wyoming CDL, you need to score at least 20 out of 25 on the official version.
Topics covered on this practice test
- Inspection: 5 questions
- Speed Management: 3 questions
- Combination Air: 3 questions
- Spring Brakes: 3 questions
- Compressor: 3 questions
- System Basics: 2 questions
- Gauges: 2 questions
- Parking: 1 question
- Emergency Maneuvers: 1 question
- Foundation Brakes: 1 question
- Tanks: 1 question
How to use this practice test
- Read each question carefully. CDL questions are written precisely — small wording differences matter.
- Click "Show Answers & Explanations" only after answering every question. Don't peek mid-test.
- Read the explanation for every question, even ones you got right. The reasoning is more important than the answer.
- Repeat the test until you score 100%. The questions are deterministic per state, so you can track your improvement over multiple sessions.
- Move on to the other endorsement tests for Wyoming until you're ready for the official exam.
Tips specific to the Air Brakes test
Air Brakes questions test your ability to identify components, follow inspection sequences, and respond to system failures. Memorize the cut-in and cut-out pressures, the low-pressure warning thresholds, the pressure ranges at which spring brakes apply, and the maximum allowable air-loss rates. Many questions have nearly-identical wording, so precision matters.