25 realistic Hazardous Materials practice questions for Alabama CDL applicants. Required for: Drivers transporting placarded hazardous materials. Official test: 30 questions, 24 correct to pass.
Question 1 of 25 · Emergencies
When a HazMat package leaks, you should:
-
A.
Move it to a safe area
-
B.
Secure the area and call for help
-
C.
Continue the trip
-
D.
Place it in the trailer's rear
Correct answer: B.
Don't move leaking packages. Secure the area and contact qualified responders.
Question 2 of 25 · HazMat Driving
When transporting Class 1 explosives, the driver must:
-
A.
Park anywhere convenient
-
B.
Have a written route plan and follow it
-
C.
Drive only at night
-
D.
Drive only on local roads
Correct answer: B.
Drivers must have a route plan and avoid populated areas where possible.
Question 3 of 25 · Emergencies
What does "ERG" stand for?
-
A.
Emergency Response Guide
-
B.
Energy Regulations Guide
-
C.
Environmental Resource Guide
-
D.
Emissions Reduction Guide
Correct answer: A.
The DOT Emergency Response Guidebook contains response info for HazMat incidents.
Question 4 of 25 · HazMat Driving
When can drivers smoke around a HazMat vehicle?
-
A.
While driving only
-
B.
When parked at a truck stop
-
C.
Never within 25 feet of certain materials
-
D.
Whenever convenient
Correct answer: C.
Smoking is forbidden within 25 feet of HazMat including explosives, oxidizers, or flammables.
Question 5 of 25 · Placards
What does "subsidiary hazard class" mean?
-
A.
A secondary hazard a material poses
-
B.
A backup placard
-
C.
A small package
-
D.
A vehicle accessory
Correct answer: A.
Some materials have a primary and a subsidiary hazard class for additional risks.
Question 6 of 25 · Security
Which is true about HazMat security?
-
A.
Drivers should keep doors locked when stopped
-
B.
Drivers should never leave the vehicle unattended
-
C.
Drivers must follow the carrier's security plan
-
D.
All of the above
Correct answer: D.
All these practices reduce theft and tampering risk for HazMat.
Question 7 of 25 · Security
Which is true about HazMat training?
-
A.
Drivers must be retrained every 3 years
-
B.
Training is optional
-
C.
Only new drivers need training
-
D.
Training is the same as for non-HazMat
Correct answer: A.
HazMat training is required every three years, including security awareness.
Question 8 of 25 · Parking
When can a HazMat shipment be left unattended?
-
A.
Whenever the driver leaves the vehicle
-
B.
Only in safe locations such as a carrier facility
-
C.
Anywhere with a sign
-
D.
Only on private roads
Correct answer: B.
HazMat must be attended unless parked at a carrier facility or other approved location.
Question 9 of 25 · Loading
What is "compatibility group letter"?
-
A.
A code that tells which explosives can be loaded together
-
B.
A type of placard
-
C.
A type of vehicle
-
D.
A type of safety vest
Correct answer: A.
Letters such as "A," "B," etc., classify explosives that can be transported together.
Question 10 of 25 · Placards
Which of these is required if a vehicle's placards are missing or destroyed?
-
A.
Placards must be replaced before continuing
-
B.
Drivers can continue without placards
-
C.
Drivers must call OSHA
-
D.
Drivers must wait until next shipping point
Correct answer: A.
Replace missing or damaged placards immediately before continuing.
Question 11 of 25 · Shipping Papers
What information must a HazMat driver have on the bills of lading?
-
A.
Total quantity by weight or volume
-
B.
Number and type of packages
-
C.
Shipping name and hazard class
-
D.
All of the above
Correct answer: D.
All of these must be included for HazMat shipments.
Question 12 of 25 · Security
Which of these is part of the carrier's security plan?
-
A.
Personnel security
-
B.
Unauthorized access prevention
-
C.
En-route security
-
D.
All of the above
Correct answer: D.
Carrier security plans cover personnel checks, access controls, and en-route security.
Question 13 of 25 · Emergencies
What is the first thing you should do if your HazMat load catches fire?
-
A.
Pull over, away from buildings or vehicles, then call 911
-
B.
Drive to the nearest hospital
-
C.
Continue to destination
-
D.
Try to put it out with snow
Correct answer: A.
Stop in a safe place, away from people and buildings, then notify emergency services.
Question 14 of 25 · HazMat Driving
What is the speed limit when transporting HazMat through a tunnel?
-
A.
Tunnel speed limit minus 10 mph
-
B.
Posted limit
-
C.
No speed limit applies to HazMat
-
D.
Posted speed unless lower limit is posted for HazMat
Correct answer: D.
Follow posted limits; lower limits often apply specifically to HazMat in tunnels.
Question 15 of 25 · Placards
Green placards usually indicate:
-
A.
Compressed gases (non-flammable)
-
B.
Explosives
-
C.
Poisons
-
D.
Corrosives
Correct answer: A.
Green placards usually indicate non-flammable compressed gases.
Question 16 of 25 · HazMat Driving
What should a driver do before transporting any HazMat shipment?
-
A.
Inspect the placards and shipping papers
-
B.
Inspect the vehicle and cargo
-
C.
Plan the route
-
D.
All of the above
Correct answer: D.
Verify all paperwork, vehicle, cargo, and route before HazMat transport.
Question 17 of 25 · Placards
Yellow placards generally indicate:
-
A.
Flammable solids
-
B.
Oxidizers
-
C.
Corrosives
-
D.
Radioactive materials
Correct answer: B.
Yellow placards usually indicate oxidizers.
Question 18 of 25 · Placards
How many sides of a HazMat vehicle must be placarded?
-
A.
One
-
B.
Two
-
C.
Three
-
D.
Four
Correct answer: D.
Placards must be displayed on all four sides of the vehicle.
Question 19 of 25 · Loading
When loading or unloading HazMat:
-
A.
Set the parking brake
-
B.
Be sure the cargo is properly braced
-
C.
Stay close to the vehicle
-
D.
All of the above
Correct answer: D.
Keep the brakes set, secure cargo, and remain on alert during loading and unloading.
Question 20 of 25 · Placards
Which placard color usually means a flammable material?
-
A.
Red
-
B.
Yellow
-
C.
Green
-
D.
Blue
Correct answer: A.
Red typically indicates flammable materials.
Question 21 of 25 · Parking
When parking HazMat overnight, you should:
-
A.
Park near homes
-
B.
Choose well-lit, safe areas away from people and buildings
-
C.
Park on the shoulder of any road
-
D.
Park in residential areas
Correct answer: B.
Use safe, well-lit parking areas away from people and buildings.
Question 22 of 25 · Placards
How are placards different from labels?
-
A.
Labels go on packages; placards go on vehicles
-
B.
Placards go on packages and labels go on vehicles
-
C.
They are the same
-
D.
Labels are only required outside the U.S.
Correct answer: A.
Labels mark individual packages; placards identify HazMat on vehicles.
Question 23 of 25 · Shipping Papers
Drivers must check shipping papers for:
-
A.
Proper shipping name, hazard class, identification number
-
B.
Total quantity
-
C.
Emergency response number
-
D.
All of the above
Correct answer: D.
Each entry must include the shipping name, class, ID number, quantity, and emergency contact.
Question 24 of 25 · HazMat Basics
What is "hazard class"?
-
A.
A grouping of materials by hazard type
-
B.
A type of placard
-
C.
A required driving license
-
D.
A type of HazMat trailer
Correct answer: A.
There are nine hazard classes that group materials with similar dangers.
Question 25 of 25 · Inspection
HazMat drivers must inspect tires:
-
A.
Once a day
-
B.
At the start of the trip and at every stop
-
C.
Once a week
-
D.
Only at weigh stations
Correct answer: B.
Inspect tires before the trip and at each stop because hot or damaged tires raise fire risk.
About the Hazardous Materials Test
The Hazardous Materials (HazMat) test covers the rules for transporting materials that pose a risk to health, safety, and property. Topics include the hazardous materials table, shipping papers, marking, labeling, placarding, loading and unloading, bulk packaging, driving and parking rules, communications, emergencies, and hazardous materials regulations enforced by the U.S. Department of Transportation Pipeline and Hazardous Materials Safety Administration. A federal Transportation Security Administration (TSA) background check is also required.
The Alabama Law Enforcement Agency — Driver License Division administers this knowledge test as part of its commercial driver license program. To earn the HazMat Endorsement (H) on your Alabama CDL, you need to score at least 24 out of 30 on the official version.
Topics covered on this practice test
- Placards: 7 questions
- HazMat Driving: 4 questions
- Emergencies: 3 questions
- Security: 3 questions
- Parking: 2 questions
- Loading: 2 questions
- Shipping Papers: 2 questions
- HazMat Basics: 1 question
- Inspection: 1 question
How to use this practice test
- Read each question carefully. CDL questions are written precisely — small wording differences matter.
- Click "Show Answers & Explanations" only after answering every question. Don't peek mid-test.
- Read the explanation for every question, even ones you got right. The reasoning is more important than the answer.
- Repeat the test until you score 100%. The questions are deterministic per state, so you can track your improvement over multiple sessions.
- Move on to the other endorsement tests for Alabama until you're ready for the official exam.
Tips specific to the Hazardous Materials test
HazMat is the longest knowledge test (30 questions) and adds a Transportation Security Administration (TSA) background check. Most candidates struggle with placard colors, the segregation table, shipping paper requirements, and emergency response procedures. Use the official Emergency Response Guidebook (ERG) alongside this practice set.