25 realistic Tank Vehicles practice questions for Maryland CDL applicants. Required for: Vehicles with liquid or gaseous tanks ≥1,000 gallons. Official test: 20 questions, 16 correct to pass.
Question 1 of 25 · Vehicle Dynamics
How does liquid weight affect handling?
-
A.
It changes the center of gravity
-
B.
It affects acceleration
-
C.
It affects braking
-
D.
All of the above
Correct answer: D.
Liquid loads alter CG and dramatically affect acceleration and braking.
Question 2 of 25 · Tank Types
What is "compartmented tanks"?
-
A.
Tanks split into multiple sections
-
B.
Tanks made for grain
-
C.
Tanks made for hazardous materials only
-
D.
Tanks with one large interior
Correct answer: A.
Compartmented tanks have multiple sections so different liquids can be carried separately.
Question 3 of 25 · Vehicle Dynamics
Why must drivers be especially careful when starting and stopping a tanker?
-
A.
Surge can cause loss of control
-
B.
Engine torque is too high
-
C.
Brakes are weaker
-
D.
Steering is harder
Correct answer: A.
Surge during starts and stops can shove the vehicle and cause loss of control.
Question 4 of 25 · Inspection
How can drivers detect a tank leak?
-
A.
Visual inspection during pre-trip and en-route stops
-
B.
Smell of the cargo
-
C.
Sound of escaping fluid
-
D.
All of the above
Correct answer: D.
Sight, smell, and sound can all help detect leaks. Inspect at every stop.
Question 5 of 25 · Mountain Driving
What's the proper way to handle a tanker on a steep downgrade?
-
A.
Use lower gears and engine braking with intermittent service brake
-
B.
Coast in neutral
-
C.
Brake hard the whole way
-
D.
Use the parking brake
Correct answer: A.
Lower gears and engine braking; use service brakes intermittently to avoid overheating.
Question 6 of 25 · Tank Types
What is a baffled tank?
-
A.
A tank with internal walls that have holes to slow surge
-
B.
A tank with separate compartments
-
C.
A tank with a smooth interior
-
D.
A tank with no walls inside
Correct answer: A.
Baffles slow forward and back surge, but not side-to-side surge.
Question 7 of 25 · Backing
What should a driver do before backing a tanker?
-
A.
Check the path with a helper
-
B.
Look behind the vehicle
-
C.
Walk around the vehicle to check clearances
-
D.
All of the above
Correct answer: D.
Use a helper, walk-around, and check the path before backing.
Question 8 of 25 · Loading
Why must tanker drivers be careful when refueling?
-
A.
Risk of fire from spills
-
B.
Risk of cargo contamination
-
C.
Risk of overloading
-
D.
Both A and B
Correct answer: D.
Spills can ignite and cargo can be contaminated by fuel.
Question 9 of 25 · Loading
What's the consequence of overloading a tank?
-
A.
Increased wear on tires and brakes
-
B.
Possible tank rupture
-
C.
Illegal weight violations
-
D.
All of the above
Correct answer: D.
Overloading causes wear, legal trouble, and danger of tank failure.
Question 10 of 25 · Inspection
What is the proper way to inspect a tank before driving?
-
A.
Check valves, manhole, and tank shell for leaks and damage
-
B.
Just check the tires
-
C.
Only inspect the engine
-
D.
Skip inspection if you're in a hurry
Correct answer: A.
Inspect valves, manhole, shell, hoses, and other tank components every pre-trip.
Question 11 of 25 · Inspection
What's the importance of regular maintenance for tank vehicles?
-
A.
Prevents leaks
-
B.
Ensures safe operation
-
C.
Identifies problems before failures
-
D.
All of the above
Correct answer: D.
Routine maintenance prevents leaks, failures, and unsafe operation.
Question 12 of 25 · Speed Management
What should you do when going around curves with a tanker?
-
A.
Slow down well below the posted speed
-
B.
Drive at the posted speed limit
-
C.
Use the engine retarder
-
D.
Lock the brakes
Correct answer: A.
Take curves at speeds well below the posted limit to avoid rollovers.
Question 13 of 25 · Loading
Why is it important not to overload tank vehicles?
-
A.
Overloading exceeds weight limits
-
B.
It increases risk of tank rupture
-
C.
It changes vehicle handling
-
D.
All of the above
Correct answer: D.
Overloading is illegal and unsafe; it changes handling and stresses the tank.
Question 14 of 25 · Vehicle Dynamics
How can drivers prevent tanker rollover?
-
A.
Reduce speed in curves and ramps
-
B.
Avoid sudden steering
-
C.
Maintain proper load and securement
-
D.
All of the above
Correct answer: D.
Slow speed, smooth steering, and proper loading all help prevent rollovers.
Question 15 of 25 · Tank Types
What's a "high-volume" tank?
-
A.
A tank with capacity greater than typical
-
B.
A tank with high pressure
-
C.
A tank with multiple compartments
-
D.
A tank with a smooth interior
Correct answer: A.
High-volume tanks carry more than typical loads and are subject to special rules.
Question 16 of 25 · Loading
How can drivers tell if a tank is properly loaded?
-
A.
Check that all compartments are filled within outage limits
-
B.
Check the weight distribution
-
C.
Confirm valves are closed
-
D.
All of the above
Correct answer: D.
Verify outage, weight distribution, and closed valves before moving.
Question 17 of 25 · Vehicle Dynamics
When is liquid surge greatest?
-
A.
When tanks are full
-
B.
When tanks are partially full
-
C.
When tanks are empty
-
D.
When tanks are heated
Correct answer: B.
Surge is greatest when tanks are partially full and the liquid can move freely.
Question 18 of 25 · Vehicle Dynamics
What are some hazards of driving smooth-bore tankers?
-
A.
Side-to-side and forward-and-back surge
-
B.
High center of gravity
-
C.
Difficult handling on curves
-
D.
All of the above
Correct answer: D.
Smooth-bore tanks are especially prone to surge, rollover, and difficult handling.
Question 19 of 25 · Operation
What's the recommended safe braking technique for tank trucks?
-
A.
Apply brakes gradually well before stopping
-
B.
Quick, hard braking
-
C.
Use the engine retarder primarily
-
D.
Brake at the last second
Correct answer: A.
Brake gradually and well in advance — sudden braking magnifies surge.
Question 20 of 25 · Tank Types
What is a "smooth bore" tank?
-
A.
A tank with internal baffles
-
B.
A tank without internal baffles or compartments
-
C.
A heated tank
-
D.
A two-compartment tank
Correct answer: B.
Smooth-bore tanks have no internal baffles, so liquid surge is unrestrained.
Question 21 of 25 · Rail Crossings
What's the recommended safe practice when crossing railroad tracks with a tanker?
-
A.
Stop within 15-50 feet of nearest rail and look and listen for trains
-
B.
Speed up across the tracks
-
C.
Stop on the tracks
-
D.
Drive across normally
Correct answer: A.
Stop 15 to 50 feet from nearest rail. Don't shift gears while crossing.
Question 22 of 25 · Emergency Equipment
What equipment must be on a HazMat tank vehicle?
-
A.
Emergency response equipment
-
B.
Spill kits as required
-
C.
Communication devices
-
D.
All of the above
Correct answer: D.
Carry spill response gear, communication, and any other required equipment.
Question 23 of 25 · Vehicle Dynamics
Why is liquid surge dangerous?
-
A.
It can cause the truck to roll over
-
B.
It can push the truck in the direction the wave moves
-
C.
It can affect handling and braking
-
D.
All of the above
Correct answer: D.
Surge can roll, push, and disrupt braking — drivers must anticipate it.
Question 24 of 25 · Inspection
When checking tanks during pre-trip, what should be inspected?
-
A.
Tank shell for cracks or corrosion
-
B.
Manhole cover and seals
-
C.
Discharge valves
-
D.
All of the above
Correct answer: D.
Inspect the shell, seals, valves, and other tank components every pre-trip.
Question 25 of 25 · Parking
What's the safest place to park a tank vehicle overnight?
-
A.
Designated truck parking areas away from buildings
-
B.
On the highway shoulder
-
C.
In residential areas
-
D.
Anywhere with lighting
Correct answer: A.
Use designated truck parking areas away from people and buildings.
About the Tank Vehicles Test
The Tank Vehicles test covers inspecting tank vehicles, driving tank vehicles, surge and liquid movement, baffled and unbaffled tanks, outage, and safe driving rules unique to large liquid loads. Tank vehicles handle very differently from dry-freight vehicles because liquid surge can shove the vehicle in the direction the wave moves.
The Maryland Motor Vehicle Administration administers this knowledge test as part of its commercial driver license program. To earn the Tank Endorsement (N) on your Maryland CDL, you need to score at least 16 out of 20 on the official version.
Topics covered on this practice test
- Vehicle Dynamics: 6 questions
- Tank Types: 4 questions
- Inspection: 4 questions
- Loading: 4 questions
- Mountain Driving: 1 question
- Backing: 1 question
- Speed Management: 1 question
- Operation: 1 question
- Rail Crossings: 1 question
- Emergency Equipment: 1 question
- Parking: 1 question
How to use this practice test
- Read each question carefully. CDL questions are written precisely — small wording differences matter.
- Click "Show Answers & Explanations" only after answering every question. Don't peek mid-test.
- Read the explanation for every question, even ones you got right. The reasoning is more important than the answer.
- Repeat the test until you score 100%. The questions are deterministic per state, so you can track your improvement over multiple sessions.
- Move on to the other endorsement tests for Maryland until you're ready for the official exam.
Tips specific to the Tank Vehicles test
Tank vehicle questions focus on liquid surge, outage, smooth-bore versus baffled tanks, high center of gravity, and the special braking and turning techniques required to keep a partially-loaded tank under control. Expect several questions about leak response and load distribution.