25 realistic Tank Vehicles practice questions for Missouri CDL applicants. Required for: Vehicles with liquid or gaseous tanks ≥1,000 gallons. Official test: 20 questions, 16 correct to pass.
Question 1 of 25 · Loading
Why is it important not to overload tank vehicles?
-
A.
Overloading exceeds weight limits
-
B.
It increases risk of tank rupture
-
C.
It changes vehicle handling
-
D.
All of the above
Correct answer: D.
Overloading is illegal and unsafe; it changes handling and stresses the tank.
Question 2 of 25 · Speed Management
When should tank drivers especially reduce speed?
-
A.
On wet or slippery roads
-
B.
On curves
-
C.
On ramps
-
D.
All of the above
Correct answer: D.
Slow down on wet roads, curves, and ramps — all increase rollover risk.
Question 3 of 25 · Loading
Why must tanker drivers be careful when refueling?
-
A.
Risk of fire from spills
-
B.
Risk of cargo contamination
-
C.
Risk of overloading
-
D.
Both A and B
Correct answer: D.
Spills can ignite and cargo can be contaminated by fuel.
Question 4 of 25 · Vehicle Dynamics
How does liquid weight affect handling?
-
A.
It changes the center of gravity
-
B.
It affects acceleration
-
C.
It affects braking
-
D.
All of the above
Correct answer: D.
Liquid loads alter CG and dramatically affect acceleration and braking.
Question 5 of 25 · Vehicle Dynamics
Why is liquid surge dangerous?
-
A.
It can cause the truck to roll over
-
B.
It can push the truck in the direction the wave moves
-
C.
It can affect handling and braking
-
D.
All of the above
Correct answer: D.
Surge can roll, push, and disrupt braking — drivers must anticipate it.
Question 6 of 25 · Placards
What's the role of the tanker placard?
-
A.
To identify cargo for emergency responders
-
B.
To indicate the vehicle is heavy
-
C.
To indicate the vehicle is restricted
-
D.
To warn of slow speed
Correct answer: A.
Placards identify cargo, alerting first responders to the type of hazard.
Question 7 of 25 · Adverse Conditions
What's the safe way to handle a tanker in heavy wind?
-
A.
Slow down and grip steering firmly
-
B.
Speed up to maintain control
-
C.
Use the engine retarder
-
D.
Lock the brakes
Correct answer: A.
High winds destabilize tankers; slow down and steer firmly.
Question 8 of 25 · Vehicle Dynamics
What can cause a tanker to roll over?
-
A.
Sharp turns
-
B.
Sudden steering corrections
-
C.
Speed too high for road conditions
-
D.
All of the above
Correct answer: D.
All of these can cause rollovers; smooth, slow inputs reduce risk.
Question 9 of 25 · Inspection
Why must drivers check the discharge valve before driving?
-
A.
To verify it is closed and not leaking
-
B.
To allow ventilation
-
C.
To start the engine
-
D.
To engage the brakes
Correct answer: A.
Discharge valves must be closed and leak-free before driving.
Question 10 of 25 · Mountain Driving
How do drivers control speed on downgrades with tankers?
-
A.
Use lower gears and engine braking
-
B.
Use service brakes only
-
C.
Coast with no brakes
-
D.
Use parking brake
Correct answer: A.
Use proper low gears and engine braking; service brakes only intermittently.
Question 11 of 25 · Loading
What's the consequence of overloading a tank?
-
A.
Increased wear on tires and brakes
-
B.
Possible tank rupture
-
C.
Illegal weight violations
-
D.
All of the above
Correct answer: D.
Overloading causes wear, legal trouble, and danger of tank failure.
Question 12 of 25 · Inspection
When checking tanks during pre-trip, what should be inspected?
-
A.
Tank shell for cracks or corrosion
-
B.
Manhole cover and seals
-
C.
Discharge valves
-
D.
All of the above
Correct answer: D.
Inspect the shell, seals, valves, and other tank components every pre-trip.
Question 13 of 25 · Speed Management
What should you do when going around curves with a tanker?
-
A.
Slow down well below the posted speed
-
B.
Drive at the posted speed limit
-
C.
Use the engine retarder
-
D.
Lock the brakes
Correct answer: A.
Take curves at speeds well below the posted limit to avoid rollovers.
Question 14 of 25 · Tank Types
What's a key difference between compartmented and smooth-bore tanks?
-
A.
Compartmented tanks reduce surge between sections
-
B.
Smooth-bore tanks have less surge
-
C.
They are the same in terms of surge
-
D.
Compartmented tanks are always larger
Correct answer: A.
Compartmented tanks reduce overall surge by limiting movement to each section.
Question 15 of 25 · Inspection
How can drivers detect a tank leak?
-
A.
Visual inspection during pre-trip and en-route stops
-
B.
Smell of the cargo
-
C.
Sound of escaping fluid
-
D.
All of the above
Correct answer: D.
Sight, smell, and sound can all help detect leaks. Inspect at every stop.
Question 16 of 25 · HazMat Driving
Why is "no smoking" enforced near tankers?
-
A.
Risk of fire and explosion from cargo vapors
-
B.
Cleanliness
-
C.
Tradition
-
D.
OSHA rules only
Correct answer: A.
Vapors can ignite or explode; smoking is prohibited near tankers.
Question 17 of 25 · Mountain Driving
What's the proper way to handle a tanker on a steep downgrade?
-
A.
Use lower gears and engine braking with intermittent service brake
-
B.
Coast in neutral
-
C.
Brake hard the whole way
-
D.
Use the parking brake
Correct answer: A.
Lower gears and engine braking; use service brakes intermittently to avoid overheating.
Question 18 of 25 · Rail Crossings
What's the recommended safe practice when crossing railroad tracks with a tanker?
-
A.
Stop within 15-50 feet of nearest rail and look and listen for trains
-
B.
Speed up across the tracks
-
C.
Stop on the tracks
-
D.
Drive across normally
Correct answer: A.
Stop 15 to 50 feet from nearest rail. Don't shift gears while crossing.
Question 19 of 25 · Emergency Equipment
What equipment must be on a HazMat tank vehicle?
-
A.
Emergency response equipment
-
B.
Spill kits as required
-
C.
Communication devices
-
D.
All of the above
Correct answer: D.
Carry spill response gear, communication, and any other required equipment.
Question 20 of 25 · Tank Types
What is "compartmented tanks"?
-
A.
Tanks split into multiple sections
-
B.
Tanks made for grain
-
C.
Tanks made for hazardous materials only
-
D.
Tanks with one large interior
Correct answer: A.
Compartmented tanks have multiple sections so different liquids can be carried separately.
Question 21 of 25 · Speed Management
What is the leading cause of tanker rollover?
-
A.
Driver error such as speed too high for curves
-
B.
Mechanical failure
-
C.
Weather only
-
D.
Tire blowouts
Correct answer: A.
Speed too high for conditions, especially in curves, is the leading rollover cause.
Question 22 of 25 · Emergency Maneuvers
What's the best approach to handling a flat tire on a tanker?
-
A.
Pull over safely and replace the tire or call for help
-
B.
Continue driving
-
C.
Drive faster to make it to the next exit
-
D.
Stop in the middle of the road
Correct answer: A.
Stop safely and address the flat — driving on it can lead to bigger problems.
Question 23 of 25 · Adverse Conditions
What's the best practice for starting on slippery roads with a tanker?
-
A.
Accelerate slowly to avoid wheel spin
-
B.
Accelerate quickly
-
C.
Use the lowest gear and slip clutch
-
D.
Use parking brake
Correct answer: A.
Smooth, slow acceleration avoids spinning the drive tires.
Question 24 of 25 · Inspection
What's the importance of the tank shell's integrity?
-
A.
It contains the cargo and prevents leaks
-
B.
It supports the chassis
-
C.
It absorbs shock
-
D.
It connects to the brakes
Correct answer: A.
A sound tank shell prevents leaks and contains pressure from the cargo.
Question 25 of 25 · Loading
How can drivers tell if a tank is properly loaded?
-
A.
Check that all compartments are filled within outage limits
-
B.
Check the weight distribution
-
C.
Confirm valves are closed
-
D.
All of the above
Correct answer: D.
Verify outage, weight distribution, and closed valves before moving.
About the Tank Vehicles Test
The Tank Vehicles test covers inspecting tank vehicles, driving tank vehicles, surge and liquid movement, baffled and unbaffled tanks, outage, and safe driving rules unique to large liquid loads. Tank vehicles handle very differently from dry-freight vehicles because liquid surge can shove the vehicle in the direction the wave moves.
The Missouri Department of Revenue — Driver License Bureau administers this knowledge test as part of its commercial driver license program. To earn the Tank Endorsement (N) on your Missouri CDL, you need to score at least 16 out of 20 on the official version.
Topics covered on this practice test
- Loading: 4 questions
- Inspection: 4 questions
- Speed Management: 3 questions
- Vehicle Dynamics: 3 questions
- Adverse Conditions: 2 questions
- Mountain Driving: 2 questions
- Tank Types: 2 questions
- Placards: 1 question
- HazMat Driving: 1 question
- Rail Crossings: 1 question
- Emergency Equipment: 1 question
- Emergency Maneuvers: 1 question
How to use this practice test
- Read each question carefully. CDL questions are written precisely — small wording differences matter.
- Click "Show Answers & Explanations" only after answering every question. Don't peek mid-test.
- Read the explanation for every question, even ones you got right. The reasoning is more important than the answer.
- Repeat the test until you score 100%. The questions are deterministic per state, so you can track your improvement over multiple sessions.
- Move on to the other endorsement tests for Missouri until you're ready for the official exam.
Tips specific to the Tank Vehicles test
Tank vehicle questions focus on liquid surge, outage, smooth-bore versus baffled tanks, high center of gravity, and the special braking and turning techniques required to keep a partially-loaded tank under control. Expect several questions about leak response and load distribution.