25 realistic Tank Vehicles practice questions for Vermont CDL applicants. Required for: Vehicles with liquid or gaseous tanks ≥1,000 gallons. Official test: 20 questions, 16 correct to pass.
Question 1 of 25 · Adverse Conditions
What's the best practice for starting on slippery roads with a tanker?
-
A.
Accelerate slowly to avoid wheel spin
-
B.
Accelerate quickly
-
C.
Use the lowest gear and slip clutch
-
D.
Use parking brake
Correct answer: A.
Smooth, slow acceleration avoids spinning the drive tires.
Question 2 of 25 · Vehicle Dynamics
What's the most important thing to remember about driving a tanker?
-
A.
Be aware of liquid surge and high center of gravity
-
B.
Drive faster to maintain schedule
-
C.
Skip pre-trip inspections
-
D.
Ignore weather conditions
Correct answer: A.
Surge and CG awareness are the cornerstones of safe tanker driving.
Question 3 of 25 · Adverse Conditions
What's the safe way to handle a tanker on icy roads?
-
A.
Slow down and increase following distance
-
B.
Use chains if required
-
C.
Avoid sudden braking and steering
-
D.
All of the above
Correct answer: D.
Reduced speed, chains where required, and smooth inputs reduce risk on ice.
Question 4 of 25 · Loading
What's the consequence of overloading a tank?
-
A.
Increased wear on tires and brakes
-
B.
Possible tank rupture
-
C.
Illegal weight violations
-
D.
All of the above
Correct answer: D.
Overloading causes wear, legal trouble, and danger of tank failure.
Question 5 of 25 · Inspection
How can drivers detect a tank leak?
-
A.
Visual inspection during pre-trip and en-route stops
-
B.
Smell of the cargo
-
C.
Sound of escaping fluid
-
D.
All of the above
Correct answer: D.
Sight, smell, and sound can all help detect leaks. Inspect at every stop.
Question 6 of 25 · Mountain Driving
What's the proper way to handle a tanker on a steep downgrade?
-
A.
Use lower gears and engine braking with intermittent service brake
-
B.
Coast in neutral
-
C.
Brake hard the whole way
-
D.
Use the parking brake
Correct answer: A.
Lower gears and engine braking; use service brakes intermittently to avoid overheating.
Question 7 of 25 · Inspection
Why must drivers check the discharge valve before driving?
-
A.
To verify it is closed and not leaking
-
B.
To allow ventilation
-
C.
To start the engine
-
D.
To engage the brakes
Correct answer: A.
Discharge valves must be closed and leak-free before driving.
Question 8 of 25 · Vehicle Dynamics
When is it most dangerous to brake suddenly in a tanker?
-
A.
When tank is partially full
-
B.
When tank is fully loaded
-
C.
When tank is empty
-
D.
When tank is heated
Correct answer: A.
Partial loads create the most surge during sudden braking.
Question 9 of 25 · Tank Types
What is "compartmented tanks"?
-
A.
Tanks split into multiple sections
-
B.
Tanks made for grain
-
C.
Tanks made for hazardous materials only
-
D.
Tanks with one large interior
Correct answer: A.
Compartmented tanks have multiple sections so different liquids can be carried separately.
Question 10 of 25 · Vehicle Dynamics
What are some hazards of driving smooth-bore tankers?
-
A.
Side-to-side and forward-and-back surge
-
B.
High center of gravity
-
C.
Difficult handling on curves
-
D.
All of the above
Correct answer: D.
Smooth-bore tanks are especially prone to surge, rollover, and difficult handling.
Question 11 of 25 · Rail Crossings
What's the recommended safe practice when crossing railroad tracks with a tanker?
-
A.
Stop within 15-50 feet of nearest rail and look and listen for trains
-
B.
Speed up across the tracks
-
C.
Stop on the tracks
-
D.
Drive across normally
Correct answer: A.
Stop 15 to 50 feet from nearest rail. Don't shift gears while crossing.
Question 12 of 25 · Placards
What's the role of the tanker placard?
-
A.
To identify cargo for emergency responders
-
B.
To indicate the vehicle is heavy
-
C.
To indicate the vehicle is restricted
-
D.
To warn of slow speed
Correct answer: A.
Placards identify cargo, alerting first responders to the type of hazard.
Question 13 of 25 · Loading
What is a vapor recovery system?
-
A.
A way to recover heat
-
B.
A system to recover vapors during loading and unloading to reduce emissions
-
C.
An air brake component
-
D.
A backup pump
Correct answer: B.
Vapor recovery captures vapors during transfer to limit emissions.
Question 14 of 25 · Adverse Conditions
What's the safe way to handle a tanker in heavy wind?
-
A.
Slow down and grip steering firmly
-
B.
Speed up to maintain control
-
C.
Use the engine retarder
-
D.
Lock the brakes
Correct answer: A.
High winds destabilize tankers; slow down and steer firmly.
Question 15 of 25 · Emergencies
What action should a driver take if a tank starts to leak?
-
A.
Stop immediately in a safe area and report the leak
-
B.
Continue to destination
-
C.
Try to close the leak
-
D.
Drive faster
Correct answer: A.
Stop in a safe area, secure the area, and notify the carrier and emergency services.
Question 16 of 25 · Vehicle Dynamics
Why are tank vehicles often top-heavy?
-
A.
The cargo is dense
-
B.
The cargo's liquid weight rises with the tank shape
-
C.
They have raised cargo platforms
-
D.
The center of gravity is high due to liquid load
Correct answer: D.
Tank vehicles tend to have a high center of gravity, making them prone to rollover.
Question 17 of 25 · Loading
When loading tanks, what must drivers consider?
-
A.
Outage requirements for the liquid
-
B.
Weight distribution between compartments
-
C.
Surge potential
-
D.
All of the above
Correct answer: D.
Outage, weight distribution, and surge management all matter when loading tanks.
Question 18 of 25 · HazMat Driving
Why is "no smoking" enforced near tankers?
-
A.
Risk of fire and explosion from cargo vapors
-
B.
Cleanliness
-
C.
Tradition
-
D.
OSHA rules only
Correct answer: A.
Vapors can ignite or explode; smoking is prohibited near tankers.
Question 19 of 25 · Speed Management
What should you do when going around curves with a tanker?
-
A.
Slow down well below the posted speed
-
B.
Drive at the posted speed limit
-
C.
Use the engine retarder
-
D.
Lock the brakes
Correct answer: A.
Take curves at speeds well below the posted limit to avoid rollovers.
Question 20 of 25 · Vehicle Dynamics
How does liquid weight affect handling?
-
A.
It changes the center of gravity
-
B.
It affects acceleration
-
C.
It affects braking
-
D.
All of the above
Correct answer: D.
Liquid loads alter CG and dramatically affect acceleration and braking.
Question 21 of 25 · Speed Management
When should tank drivers especially reduce speed?
-
A.
On wet or slippery roads
-
B.
On curves
-
C.
On ramps
-
D.
All of the above
Correct answer: D.
Slow down on wet roads, curves, and ramps — all increase rollover risk.
Question 22 of 25 · Vehicle Dynamics
How do drivers minimize side-to-side surge?
-
A.
Avoid abrupt lane changes and turns
-
B.
Take turns wide and slow
-
C.
Use partial loads
-
D.
Both A and B
Correct answer: D.
Smooth, slow inputs and wide turns help reduce side-to-side surge.
Question 23 of 25 · Tank Types
What is a "smooth bore" tank?
-
A.
A tank with internal baffles
-
B.
A tank without internal baffles or compartments
-
C.
A heated tank
-
D.
A two-compartment tank
Correct answer: B.
Smooth-bore tanks have no internal baffles, so liquid surge is unrestrained.
Question 24 of 25 · Placards
Why are tankers required to have specific markings?
-
A.
To identify the cargo and any hazards
-
B.
To make them more visible
-
C.
For tax purposes
-
D.
For insurance only
Correct answer: A.
Markings identify cargo and any hazards for emergency responders and others.
Question 25 of 25 · Inspection
What is the proper way to inspect a tank before driving?
-
A.
Check valves, manhole, and tank shell for leaks and damage
-
B.
Just check the tires
-
C.
Only inspect the engine
-
D.
Skip inspection if you're in a hurry
Correct answer: A.
Inspect valves, manhole, shell, hoses, and other tank components every pre-trip.
About the Tank Vehicles Test
The Tank Vehicles test covers inspecting tank vehicles, driving tank vehicles, surge and liquid movement, baffled and unbaffled tanks, outage, and safe driving rules unique to large liquid loads. Tank vehicles handle very differently from dry-freight vehicles because liquid surge can shove the vehicle in the direction the wave moves.
The Vermont Department of Motor Vehicles administers this knowledge test as part of its commercial driver license program. To earn the Tank Endorsement (N) on your Vermont CDL, you need to score at least 16 out of 20 on the official version.
Topics covered on this practice test
- Vehicle Dynamics: 6 questions
- Adverse Conditions: 3 questions
- Loading: 3 questions
- Inspection: 3 questions
- Tank Types: 2 questions
- Placards: 2 questions
- Speed Management: 2 questions
- Mountain Driving: 1 question
- Rail Crossings: 1 question
- Emergencies: 1 question
- HazMat Driving: 1 question
How to use this practice test
- Read each question carefully. CDL questions are written precisely — small wording differences matter.
- Click "Show Answers & Explanations" only after answering every question. Don't peek mid-test.
- Read the explanation for every question, even ones you got right. The reasoning is more important than the answer.
- Repeat the test until you score 100%. The questions are deterministic per state, so you can track your improvement over multiple sessions.
- Move on to the other endorsement tests for Vermont until you're ready for the official exam.
Tips specific to the Tank Vehicles test
Tank vehicle questions focus on liquid surge, outage, smooth-bore versus baffled tanks, high center of gravity, and the special braking and turning techniques required to keep a partially-loaded tank under control. Expect several questions about leak response and load distribution.